EML Series Continuous Miner-manufacture,factory,supplier from China

Designation and OverviewThe continuous miner is mainly used for mechanized short-wall mining in underground mines and rapid roadway tunneling. At present, the Company has presented products with various mining heights ranging from 1.3~2.5 m, 1.8~3.5 m，2.6~4.6 m to 3.3~5.5 m, so that the models may serve as complements for each other in terms of cutting height, thus almost covering all coal occurrence conditions in thin, medium, and thick coal seams, and meeting the production needs of major coal enterprises.

The lnstitute has come up with the applicatior scenarios of the continuous miner based on the research on and field practice of the co ontinuous mining technology under various coal seam conditions in recent years.1. It is applicable to coal seams with buried de pth less than 500 m.2. It is applicable to coal seams with an inclinat tion of less than 10° and not exceeding 16° locally.3. It is applicable to medium hard coal seams v with medium stability on the roof and floor.4. lt is applicable to coal seams with a thickne ss of 2.0-5 m and a simple structure.5.

J21-80/500T SERIES OPEN FIXED TABLE PUNCHSpecificationsUnitJ21-80J21-125J21-168J21-205J21-250J21-315J21-400J21-500Nominal CapacityKN8001250168020502500315040005000Nominal Pressure strokemm710121212161616Stroke of Slidemm120130150150150180180180Strokes per Minute次/分4038353232303030Max die heightmm310380390430410500500500Die height adjustmentmm80100100100100100100100Distance from worktable to the bottom of guidemm310380380380460460460460Table SizeFront-Backmm570710740740900900900900Right-Left8601080107010701200135013501350Hole DiameterThicknessφ180φ250φ200φ200φ200φ300φ300φ30080100150150150180200

J31 SERIES CLOSED SINGLE POINT PRESSSpecificationsUnitJ31-100J31-125J31-160J31-200J31-250J31-315J31-400J31-500Nominal CapacityKN10001250160020002500315040005000Nominal Pressure strokemm1010111212131313Stroke of Slidemm180210210210210180180180Strokes per Minute次/分3535323232303030Max die heightmm260295370330520500500500Die height adjustmentmm100100100100100100100100Table SizeFront-Backmm650690710850850900900900Right-Left625650680700700135013501350Hole Diameterφ180φ180φ320φ300φ300φ300φ300300Thickness90100100140140180180180Slider Bottom SizeFront-Backmm365365400570570600600600Right-Left38040542054

CR-100/170T SERIES FORGING SEMICIRCLE ROLLING AND ROLLING MILLModel SpecificationSize of Work  Finished ProductMain Horse PowerCR100250φ*14025φmm350L7.5KW*6PCR125300φ*22038φmm450L 11KW*6PCR150360φ*24045φmm550L18.5KW*6CR170600φ*540 60φmm850L30KW*6P

VCP-25/400T SERIES OPEN PRECISION STEEL FRAME PUNCHItemVCP-25VCP-45VCP-60VCP-80VCP-110VCP-160VCP-200VCP-200BVCP-260VCP-260BVCP-315VCP-400CapacityTon25456080110160200200260260315400Rated Tonnage Pointmm3.23.24466667678每分种行程数Speed Changing60~14040~10035~9035~8030~6020~5020~5020~5020~4020~5020~3520~35Stable Speed7565655535353535353030Strokemm6080120150180200200200250200250300Die Heightmm195250310340360460460460500460500500Slide Adjustmentmm5060758080100110100120110120120Slide Areamm300×220×50560×340×60700×400×70770×420×70910×470×80990×550×901130×630×90990×550×901130×700×1001130×630×901130×700×100

Bolter-miner is a newly developed multifunctional road header .Many technologies of this machine belong to the new leading and innovative technologies at home al and abroad, which represent the development trend of bolter-miners in China.

VFP-G SERIES LARGE TORQUE,MULTI STATION PRECISION  HEAVY WARM FORGING MACHINE (SECONDARY DRIVE)Technical parameter Unit VFP-600GVFP-800GVFP-1000GAbilityTons 6008001000 Slider strokemm175200250Slide Adjustmentmm 101010Number of trips Spm656060Maximum clamping heightmm555695755Slider bottom panelmm755×640780×700920×800Table panelmm950×7701010×9001120×980Main motorKw×p45×655×675×6VFP-1300GVFP-1600GVFP-2000GVFP-2500GVFP-3150GVFP-4000G130016002000250031504000250300300350350350151515151515605555555555845 9151000105011001150980×8601100×10001250×11001350×11

WG2-110/315T SERIES OPEN DOUBLE AXIS PRECISION STEEL FRAME PUNCHMachine typeWG2-110WG2-160WG2-200WG2-250WG2-315ModelVHVHVHVHVHCapacity in punchingTons110160200250315Power producd pointmm53636373.584Stroke lengthmm180110200130250150280170280170Stroke per minuteS. P. M.35-6550-10030-5540-8525-4535-7020-3530-6020-3530-60Die height(S. D. A.

SC Series Shuttle Car Technical Features:1. The shuttle car is optional transportation equipment for mechanized short-wallmining face and serves as a support to the continuous miner. It is mainly used for short-wall mining faces, such as leftover coal recovery, residual coalrecovery and mining of coals under buildings, railways and water bodies that arenot suitable for long-wall mining. lt may also be used as a backup transportationtool for rapid roadway tunneling;2.

JH31 SERIES HIGH-PERFORMANCE CLOSED TYPE SINGLE  POINT PRESS (CRANKSHAFT TRANSVERSE)Technical parameterUnitJH31-200ALJH31-250ALJH31-315ALJH31-400ALJH31-500ALJH31-630ALJH31-800ALNominal forceKN2000250031504000500063008000Tripmm150150180180210210250TimesSPM40404040403532Maximum mold heightmm300300300300350350550Maximum mold heightmm100100100100100100100 Dimensions of(左右x前后)    worktable(LxF)mm820x850820x850820x850900×1000900×1000900×10001120x1100Thickness of worktable plate140140160160200200220Center hole diameterφ60φ60φ60φ60φ60φ60φ60Dimensions of the(左右x前后) &n

JH31 SERIES HIGH-PERFORMANCE CLOSED TYPE SINGLE  POINT PRESS(CRANKSHAFT TRANSVERSE)Technical parameterUnitJH31-100JH31-125JH31-160JH31-200JH31-250JH31-315JH31-400JH31-500Nominal forceKN10001250160020002500315040005000Tripmm180210210210210210250250TimesSPM3535343232323030Pressure strokemm77777789Maximum mold heightmm260300350400400450520570Maximum mold heightmm100100100100100100100100Dimensions of(左右x前后) worktable(LxF)mm625x650650x690750x710820x850820x850820x850900x1200900x1200Thickness of worktable plate100100100120120140140160Center hole diameterφ180φ180φ250φ250φ250φ250φ300φ300Dimen

Technical features:1. The hopper volume of the feeder crusher is large and can store a certain amount of coal. And due to the relatively large instantaneous conveying capacity of the bolter-miner, the coal can be conveyed evenly after being buffered by the hopper of the traveling feed crusher. 2. The hydraulic system is powered by a plunger pump with load-sensitive feedback, pressure compensation and constant power control, which can save the energy consumption of the system, limit the maximum pressure of the system, and ensure that the system is not overloaded.

JW31 SERIES HIGH-PERFORMANCE WIDE TABLE CLOSED  SINGLE POINT PRESS (LONGITUDINAL CRANKSHAFT)Machine typeJW31-200JW31-250JW31-315JW31-400JW31-500JW31-630JW31-800CapacityTons200250315400500630800Stroke Lengthmm200220220250250250250Stroke Per MinuteSPM35~5520~3520~3520~3015~2515~2512~18Die height(S. D. A.

VFG SERIES SINGLE STATION PRECISION  HEAVY WARM FORGING MACHINEparameterUnitVFG-400VFG-600VFG-800VFG-1000VFG-1300VFG-1600AbilityTons400600800100013001600Slider strokemm250250300300300300Slide Adjustmentmm606060606060Number of tripsSpm605050404040Maximum clamping heightmm600600700800800850Slider bottom panelmm900x750900x750900x8001200x9501250x10601400x1200Table panelmm900x900900x9001120x9801240x12001250x12501400x1300Main motorKw×p455575110110132Loading and jacking capacity-strokeTons-mm6x306x306x306x3010x3010x30Feeding and jacking capacity-strokeTons-mm10x5010x5010x5020x5020x5020x50

JM31 SERIES HIGH-PERFORMANCE CLOSED SINGLE POINT  PRESS (LONGITUDINAL CRANKSHAFT)Technical parameterUnitJM31-400JM31-600JM31-800JM31-1000JM31-1300JM31-1600AbilityTons400600800100013001600Slide strokemm250250300300320350Slide Adjustmentmm120120120120120120Number of tripsSpm252520181816Maximum mold closing heightmm550650700700800800Slider bottom panelmm1100*11001250*11201250*12001250*12001350*12501350*1300Table panelmm1000*9501180*10801300*12001300*12001430*12001430*1320Main motorKw45Kw55Kw75Kw75Kw90Kw110KwLoading and jacking capacity-strokeTons-mm30*4550*9060*9060*9070*10080*120Feeding and

VCX -80/315T SERIES SEMI CLOSED PRECISION STEEL FRAME PUNCHMachine typeVCX-80VCX-110VCX-160VCX-200VCX-260VCX-315ModelVHVHVHVHVHVHCapacityTons80110160200260315Rated tonnage pointmm4263636373.573.5StrokeDieheightmm150701808020090200100250150300150mm340      380360410460      510460    510500550475550Stroke Per Minute35-8080-12030-6060-9020-5040-7020-5050-7020-4040-5010-2520-35Slide adjustmentmm8080100110120120Slide areamm560×420×70650×470×80700×550×90850×630×90950×700×1001000×750×110Bolster areamm740×550×90880×600×11

WTX-160/600T SERIES CLOSED DOUBLE AXIS PRECISION STEEL FRAME PUNCHMachine typeWTX-160WTX-200WTX-250WTX-300WTX-400WTX-500WTX-600ModelSHSHS    HSHSHS       H SHCapacity in punchingTons160200250300400500600Power producd pointmm63637373731012Stroke lengthmm180130250150280170300170300170350300350300Stroke per minuteSPM35-5540-8525-5035-7020-4030-6020-3530-5020-3530-4015-2525-3515-2520-30Die height(S. D. A.

CMM Series Mobile Bolter Technical features:1.Multiple independent drill arms operating in parallel for efficientroof and side wall support;2.Flexibly adjustable drill arm orientation to meet the diversifiedrequirements for drill arm numbers and spacing;3.Highly reliable crawler traveling mechanism with good adaptabilityto the roadway floor;4. Cable winding device for automatic cable retracting and layingwhen the truck is moving;5. Standard dry drilling dust collection device to purify the workingface environment and ensure personnel health.

VFP SERIES HIGH-SPEED MULTI STATION PRECISION HEAVY  WARM FORGING MACHINE (PRIMARY DRIVE)Technical parameterUnitVFP-600VFP-600WVFP-800VFP-800WVFP-1000VFP-1000WabilityTons60060080080010001000Slider strokemm175200200250250250Slide Adjustmentmm101010101012Number of tripsSpm1009595858585Number of effective working tripsSpm181818161616Maximum clamping heightmm555555695695755755Capability occurrence pointmm555555Slider bottom areamm755×640780×700780×700920×800920×800980×860Table panel areamm950×7701010×9001010×9001120×9801120×9801190×1050Main motorKw×p37kw×8p37kw×8p45kw×8p45kw×8p55kw×8p55kw×VFP

WTP-200/1000T SERIES CLOSED DOUBLE AXIS PRECISION STEEL FRAME PUNCHSpecification单位WTP-200WTP-300WTP-400CapacityTon200300400Rated Tonnage Point(above B. D. C)mm577979Stroke lengthmm150300250350300400Stroke per minutespm30-7020-3030-5020-3020-4020-30Die height(S. D. A. U)mm450500550650600700Maximum counterbalance capacity(空气压5kg/cm²)kg200025004000Slide adjustmentmm125150150Slide area(L. R×F. R)mm1650×11001850×11002000×12002350×13002500×13003400×1400Bolster area(L. R×F.

Floran International Trade (Shandong) Co., Ltd. Business scope: Heavy truck accessories such as Haowoshan Deka, T7H, T5G, C7H, Haohan, Jinzizi, Delong F3000, X30005000.M3000, New M3000, Aolong, FAW Jiefang, etc. The company adheres to the business philosophy of "quality, reputation, and service". Over the years since its establishment, it has kept up with the times and made continuous progress.

Technical features1.There are multiple drill arms for independent operation in parallel, with highsupport efficiency;2.The drill arm can be adjusted flexibly, with a large range of adjustments and awide range of applications;3. The bolt drill rig can be equipped with electro-hydraulic control valve group torealize the automation of the anchor drilling process, reducing the laborintensity of operators.

1. Braking2. Friction materials3. Wear and tear4. Safety5. PerformanceFrolan International Trade (Shandong) Co., Ltd Business scope: Heavy truck accessories for Haowo Shandeka, T7H, T5G, C7H, Haohan, Jinwangzi, Delong F3000, X30005000.M3000, new M3000, Aolong, FAW Jiefang, etc. The company adheres to the business philosophy of "quality, reputation, and service". Over the years since its establishment, it has kept up with the times and made continuous progress.