JH31 SERIES HIGH-PERFORMANCE CLOSED TYPE SINGLE POINT PRESS(CRANKSHAFT TRANSVERSE)

The frame is of steel plate box type welding structure, and has been heat treated to eliminate the internal stress of the body.

　　The sliding block is designed with eight sided guide rails, with good guidance and high precision,

Electric mold adjustment, simple operation, large amount of slider adjustment.

　　The cranksha ft is horizontally placed, and the speed ratio of big and small gears is larger, which can output greater torque; The gear box

　　adopts closed type, automatic oil dripping lubrication, which reduces noise and improves service life.

　　The dry preumatic integrated clutch is used for convenient maintenance; The design torque of the cl utch is 1.3 times of the approved torque,

which improves the safety and reliability of the equipment.

　　It has the functions of lubrication detection, fault display, crankshaft angle inspection and system operation status display.

With the support of humanized interface, the operation is simple and convenient.

Contact Now E-Mail Telephone

Product Details

JH31 SERIES HIGH-PERFORMANCE CLOSED TYPE SINGLE POINT PRESS(CRANKSHAFT TRANSVERSE)

Technical parameter	Unit	JH31-100	JH31-125	JH31-160	JH31-200	JH31-250	JH31-315	JH31-400	JH31-500
Nominal force	KN	1000	1250	1600	2000	2500	3150	4000	5000
Trip	mm	180	210	210	210	210	210	250	250
Times	SPM	35	35	34	32	32	32	30	30
Pressure stroke	mm	7	7	7	7	7	7	8	9
Maximum mold height	mm	260	300	350	400	400	450	520	570
Maximum mold height	mm	100	100	100	100	100	100	100	100
Dimensions of (左右x前后) worktable(LxF)	mm	625x650	650x690	750x710	820x850	820x850	820x850	900x1200	900x1200
Thickness of worktable plate		100	100	100	120	120	140	140	160
Center hole diameter		φ180	φ180	φ250	φ250	φ250	φ250	φ300	φ300
Dimensions of the (左右x前后) machine deck(LxF)	mm	660x650	685x690	780x710	880x850	880x850	880x850	920x1200	920x1200
Thickness of fuselage deck		100	100	100	120	120	140	140	160
Center hole diameter		φ200	φ200	φ270	φ270	φ270	φ270	φ320	φ320
Slider bottom (左右x前后) size(LxF)	mm	440x380	440x380	520x500	600x570	600x570	600x570	620x600	620x600
Shank hole diameter	mm	φ65	φ65	φ75	φ75	φ75	φ75	φ75	φ75
Pull rod hole spacing/size	mm	450/M24	450/M24	600/M30	630/M30	630/M30	630/M30	700/M30	700/M36
Distance between fuselage columns	mm	660	685	780	880	880	880	920	920
Main motor power	Kw	7.5x6P	7.5x6P	11x6P	18.5x4P	22x4P	30x4P	37x4P	45x4P